Pointer Shore Durometer Probador de dureza portátil Calibrador de medición Probador de esclerómetro Shore para probar Caucho plástico LXA-1 0.55N ~ 8.05N

Descripción

Precio: [price_with_discount]
(a partir del [price_update_date] - Detalles)

[ad_1]
How to Use:
Place the sample on a solid surface, hold the hardness tester, and press the indenter at least 12mm away from the edge of the sample on the sample smoothly and press the indenter vertically into the sample until the pressure is complete and the sample is completely pressed. Reading within 1s upon contact. Measure the hardness value 5 times at different positions with a distance of at least 6mm between the measuring points, and take the average value (the distance between the measuring points of the microporous material is at least 15mm).

Especificación:
Item Type: Hardness Tester
Material: Iron + Brass + Organic Glass
Color: As shown in the picture
Model: LXA-1
Application: Hardness value measurement
Measuring Range: 0~100HA
Pressure Needle Stroke: 0~2.5mm
Pressure at the tip of the Indenter: 0.55N~8.05N

Lista de paquetes:
1 x Hardness Tester
1 x Instruction Manual
1 x Storage Box

Note:
After using the hardness tester, wipe it clean and put it in the instrument box, and place it in a dry place to prevent it from getting wet.

Product Dimensions ‏ : ‎ 0.39 x 0.39 x 0.39 inches; 11.39 Ounces
Date First Available ‏ : ‎ August 6, 2021
Manufacturer ‏ : ‎ Kadimendium
ASIN ‏ : ‎ B09C1XPK9V

FOR VARIOUS RUBBERS :LXA‑1 hardness tester gauge, suitable for low to medium hardness plastics, various rubbers, polyester leathers, waxes, etc
SPIRAL SPRING :The spring conduction adopts the spiral spring to advance slowly, which increases the stability and accuracy of the measurement result
STRONG BITE : Hardness meter adopts all‑copper oil wire damping design, with strong bite, ensuring high accuracy and increasing service life
CLEAR SCALE :Organic glass coating dial design, anti‑scratch, exquisite workmanship, clear scale, intuitive and convenient reading
HARDNESS TESTER :The measuring range is 0~100HA, the stroke of the pressure needle is 0~2.5mm, and the pressure at the tip of the indenter is 0.55N~8.05N.

[ad_2]