Miglior tester di durezza Leeb Richter per display digitale 17.9-69.5HRC 19-651HB 80-1042HV 30.6-102.6HS

(1 recensione del cliente)

$382.00

Ottieni un preventivo gratuito

    HL-240

    Digital Display Richter Leeb Hardness Tester (Classic Type)

    Caratteristiche principali

    • It has a small size, lightweight, built-in printer, and can print test results.
    • It adopts 128×64 graphic dot-matrix liquid crystal display, which has abundant information, unlimited testing direction, and convenient operation.
    • It has an indication calibration function and can modify data at any time.  Automatically detect battery voltage and prompt for low voltage.
    • It can be directly converted into the hardness of Brinell, Rockwell, Vickers, Shore, etc.

    Gamma di applicazioni

    It is used to measure Richter hardness of steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel and other materials.

    • È ampiamente applicabile al monitoraggio della qualità nel sito di produzione e ha una forte adattabilità in un ambiente di lavoro.

    Parametri tecnici principali

    Measurement Range of Hardness:170-960HLD

    Conversion Range of Hardness:17.9-69.5HRC, 19-651HB, 80-1042HV, 30.6-102.6HS

    The direction of Measurement: 360 degrees (vertical downward, oblique downward, horizontal, oblique upward, vertical upward).

    Data storage: Maximum 100 groups (32 shocks for 1 group). According to the requirement, it can be extended to 500 groups.

    Data Output: thermal printer, printing paper width 44 mm, roll paper diameter 30 mm;

    Working voltage: 6V Ni-MH battery pack; Charging power supply: 9V/500mA; Charging time: 2.5-3.5 hours

    Shape Size: 232X91X46 (excluding impact head)

    Weight: Gross weight 4.88 kg Net weight 0.63 kg

    Accessori standard

    One D-type impact head (optional DC type, D+15, G-type impact head), one Richter hardness block and one charger

    HL-600    Digital Display Intelligent Leeb Hardness Tester
    Caratteristiche principali

    • It can be equipped with 4 kinds of different impact heads for use, and can automatically identify the type of impact head without recalibration during replacement.
    • It has a small size, lightweight, built-in printer, and can print test results.
    • It can set the hardness field value in advance and give an alarm automatically if it goes beyond the range, which is convenient for users to test in batches.
    • It adopts 128×64 graphic dot-matrix liquid crystal display, which has abundant information, unlimited testing direction, and convenient operation.
    • It has indication calibration function (software calibration), which can modify data at any time, automatically detect battery voltage and prompt for low voltage.
    • It can be directly converted into the hardness of Brinell, Rockwell, Vickers, Shore, etc.

    Gamma di applicazioni

    • It is used to measure Richter hardness of steel and cast steel, alloy tool steel, stainless steel, gray cast iron, nodular cast iron, cast aluminum alloy, copper-zinc alloy (brass), copper-tin alloy (bronze), pure copper, forged steel and other materials.
    • È ampiamente applicabile al monitoraggio della qualità nel sito di produzione e ha una forte adattabilità in un ambiente di lavoro.

    Parametri tecnici principali

    Measurement Range of Hardness:170-960HLD

    Conversion Range of Hardness:17.9-69.5HRC, 19-651HB, 80-1042HV, 30.6-102.6HS

    The direction of Measurement: 360 degrees (vertical downward, oblique downward, horizontal, oblique upward, vertical upward).

    Data storage: Maximum 100 groups (32 shocks for 1 group). According to the requirement, it can be extended to 500 groups.

    Data Output: thermal printer, USB interface, which can exchange data with PC conveniently and quickly.

    Working voltage: 6V Ni-MH battery pack; Charging power supply: 9V/500mA; Charging time: 2.5-3.5 hours

    Shape Size: 210X80X41 (excluding impact head)

    Weight: Gross weight 4.7 kg Net weight 0.47 kg

     

    Accessori standard One D-type impact head (optional DC type, D+15, G-type impact head), one Richter hardness block and one charger

    Controlla il nostro tester di durezza di vendita calda!

    Ottieni un preventivo gratuito

      fabbrica di tester di durezza
      it_ITItaliano