KZYEE KM10 Power Circuit Probe Kit, Automotive Circuit Tester with Auto Electrical System Testing Functions (Digital Voltage Tester/Multimeter/Short Finder）

설명

가격: [price_with_discount]
([price_update_date] 기준 – 세부)

[광고_1]

제품 설명

The KZYEE KM10 Power Scan kit is the most revolutionary circuit tester to date, which works off of 12-24 Volt sources, featuring voltmeter, test light, built-in flashlight, short circuit indicator, relay/component tester, continuity tester, and bad ground indicator, the power scan is indeed the ultimate in power and affordability, allowing users to check circuitry in one single step.

What’s in for you?

Capturing Min/Max VoltageLocating shorts without wasting fuses. 8 Amps Power Feed is protected by a Circuit Breaker.With the press of a switch, you’ll have an instant hot lead or ground lead. Use the probe tip and ground lead simultaneously to power up components right in your hand.The 20ft. extension cable will allow you to test bumper-to-bumper without jumper leads. Instantly check components for continuity as well as identify positive, negative, and open circuits without re-polarizing hook-up clips.

Q&A:

Q: Where to find the probe tip?

A: We keep the probe above the back of the device.

Q: Why the probe tip itself cannot stay latched? It keeps falling out.

A: You have to push it a little bit harder until you hear a “CLICK” sound, and it will stay latched.

Warm Note: Be more careful when operating it, due to the sharp probe tip.

KM10 Electrical System Tester Main Features Continuity Testing Signal Circuit Testing Trailer Lights Testing Voltage & Polarity Testing Short Circuits Locating Relay and Component Testing Bad Ground Contacts Checking Audible Monitoring of Electrical Signals

Activating Components in Your Hand and The Vehicle

With a flip of the power switch, you have a hot instant/grounding for voltage & polarity testing. It powers up components such as windows, lights, starters, wipers, and so on. Simultaneously uses the hot lead and the ground wire to activate elements right in your hand.

KM10 Test Tool Specifications

DC voltage range: 0-65V +1digitResistance range: 0-100 kΩRating current: 1-10 AmpFrequency response of tone pass through 0Hz to 10Khz. Testing Standard:100% current: Hold > 1 hour150% current: trip in one hour200% current: trip in 3-30 seconds.300% current: trip in 0.5-4.0 seconds.

Does More Than a Multimeter

Just choose the diagnose mode by pressing the mode button, and then contact the probe tip to a circuit, the LCD will read the DC/AV voltage, resistance.

Short Circuit Finder, Bad Ground Checker

KM10 follows and locates open or short circuit without having to move panels, molding or carpet to expose wires. No more fuses wasting.

No Extra Battery Needed

Two power resources. Directly connect the KM10 with the cigarette lighter or battery electrode, then you are ready to go.

Test Voltage
12-24V 12-24V 9-16V 12V Battey Capacity-2800mAh Battey Capacity-450mAh

AC,DC, Diod, Resistance Testing

✓

✓
Check and Adjust Engine Timing Read and Reset Check Engine Light 5.5mm Camera with 1080P Resolution 5.5mm Camera with 1080P Resolution

Activating Components

✓

✓
Make Your Engine Last Longer and Enhance Fuel-efficiency Read I/M readiness on Engine Comes with 4.3-inch IPS Screen For Home Inspection, HVAC Inspection

Fuel Injector Mode
×
✓
For 2-cycle and 4cycle Engines View Freeze Frame Data 3X Digital Zoom For Auto Repair, Wall Circuit Detection

Frequency，Duty Cycle Testing
×
✓
Accuract up to 8,000 RPM O2 Monitor Test Snapshot, Video Recording For Drain Pipeline Repair

Waveform Display
×
✓
Digital LCD Display On-Board Monitoring Test 360⁰ Rotation For Industrial Applications

Buzzer Switchable
×
✓
Super Bright Xenon Flash Retrieves Vehicle Information Adjustable Brightness Works for iPhone, iPad, Android 4.2+ Phone/ Tablet

Extension Cable

✓
× 4.9-Feet Extra Long Wire Lead Support All OBDII Protocols Semi-Rigid Cable Works Via WiFi from Endoscope WiFi hotspot box

제조사 에서 단종 여부: 아니오
Product Dimensions ‏ : ‎ 11 x 8.8 x 2.9 inches; 2.6 Pounds
Item model number ‏ : ‎ KM10
Date First Available ‏ : ‎ May 18, 2017
Manufacturer ‏ : ‎ KZYEE
ASIN ‏ : ‎ B071LHLSBB

KZYEE KM10 power scan kit is the most revolutionary circuit tester, which performs each type of service, such as, testing for continuity, diagnosing circuit failures, checking the good and bad ground, activating components on and off the vehicle, capturing MIN/MAX voltage, etc.
Enables to accurately diagnose the DC Voltage, AC Voltage, Resistance and Diode of the 12v-24v electrical systems by merely pressing the mode button.
Having the ability to power up the components, such as cooling fans, starters, relays, windows, washers and so on. Powered by the car battery or cigarette lighter, no additional battery or wires pulling needed.
Provides 20ft extension cable for you to reach all around your vehicles, trucks, and trailers (12V-24V). Also, the built-in flashlight is bright enough to light up your work area.
Knows how to test for bad ground contacts instantly, tracking and locating shorts fast without losing fuses. What’s more, it is circuit breaker protected, which is a safer measure to protect the tool and your components from overload.

[광고_2]