LX-D-1 경도 시험기 포인터 해안 경도 고무 시험기 다이얼 유리 측정 게이지 0N ~ 44.5N

설명

가격: [price_with_discount]
([price_update_date] 기준 – 세부)

[광고_1]
사양:
Item Type: Hardness Tester
Material: Iron + Brass + Organic Glass
Color: As shown in the picture
Model: LX-D-1
Application: Hardness value measurement
Measuring Range: 0~100HD
Pressure Needle Stroke: 0~2.5mm
Pressure at the tip of the Indenter: 0N~44.5N

패키지 목록:
1 x Hardness Tester
1 x Instruction Manual

How to Use:
Place the sample on a solid surface, hold the hardness tester, and press the indenter at least 12mm away from the edge of the sample on the sample smoothly and press the indenter vertically into the sample until the pressure is complete and the sample is completely pressed. Reading within 1s upon contact. Measure the hardness value 5 times at different positions with a distance of at least 6mm between the measuring points, and take the average value (the distance between the measuring points of the microporous material is at least 15mm).

메모:
After using the hardness tester, wipe it clean and put it in the instrument box, and place it in a dry place to prevent it from getting wet.

Product Dimensions ‏ : ‎ 0.39 x 0.39 x 0.39 inches; 10.79 Ounces
Date First Available ‏ : ‎ August 3, 2021
Manufacturer ‏ : ‎ Eujgoov
ASIN ‏ : ‎ B09BRF5535

WIDELY APPLICATION – It is suitable for high hardness test materials such as general hard rubber, hard resin, acrylic, organic glass, thermoplastic plastic, printing plate, fiber, etc.
ORGANIC GLASS PANEL – It adopts organic glass anti‑scratch coating dial, exquisite workmanship, clear scale, convenient reading, and still clear under strong light.
SPIRAL SPRING CONDUCTION – The spring conduction adopts the spiral spring to go forward one by one slowly, which increases the stability and accuracy of the measurement.
BRASS OIL WIRE – Using brass oil wire, shock absorption design, strong bite, to ensure the accuracy of measurement, and increase the service life.
MEASURING RANGE – The measuring range is 0~100HA, the stroke of the pressure needle is 0~2.5mm, and the pressure at the tip of the indenter is 0N~44.5N.

[광고_2]