Compre máquinas universais de teste de elétrons de controle de microcomputador PHE-5000/150 (máquina dois em 0ne)

This product is suitable for tension and compression tests under rated test force. It is mainly used for tensile, compressive, bending, shear, bonding strength and Rockwell hardness test of metal materials and external wall insulation materials.

$100.00

Faça um Orçamento Grátis

    Product Profile

    This product is suitable for tension and compression tests under rated test force. It is mainly used for tensile, compressive, bending, shear, bonding strength and Rockwell hardness test of metal materials and external wall insulation materials.

    It is a two-in-one machine for tension (pressure) – hardness test. The machine is controlled by computer and loaded by YASKAWA servo amplifier and ball screw is driven by servo motor.

    It can set the loading rate according to the corresponding national standards and meet the standard loading rate control index.

    It has the functions of dynamic display of load, time and test curve, real-time control and maximum test force maintenance. After one-time input of test parameters, all tests can be automatically completed sequentially.

    This machine adopts the control software based on Chinese WINDOWS 7 platform to automatically obtain the mechanical test data such as tensile strength or hardness, and print out the complete test curve and report.

    The product meets the requirements of GB/T 228, GB/T 230.2, IS0 6508, JGJ144, JG/T3049, JC/T547 and other test methods.

    Faixa de Aplicação

    • It is used for tensile, compressive, bending, shear and bonding strength tests of metal materials and exterior wall insulation materials.
    • It can measure Rockwell hardness of ferrous metals, non-ferrous metals, cemented carbides, non-metallic materials and heat treatment materials such as quenching and modulation, and surface Rockwell hardness of metal surface treated (carburizing, nitriding, electroplating).

    Parâmetros Técnicos Principais

    Modal

    Itens

    PHE-5000/150 Configuração padrão
    Tension (Pressure) Dureza eu Teste grande plano Bench 1

    eu SShopping Teste plano Bench 1

    eu Teste tipo V Bench 1

    eu Slide Carriage 

    Bancada         1

    eu Bloco de Dureza    6

    eu Cabo de alimentação       1

    eu Communication Line 1

    eu Brand Computer   1

    eu Ink-jet Printer   1

    eu Computer Operation

    Area 1

    eu Testing Software     1

    eu Tool             1

    eu Upper and Lower

    Pressing Plates  2

    Rockwell and Surface

     Rockwell Indenter

    eu Diamond Indenter   1

    eu Φ1.588 Bola

     Indenter      1

     

    acessórios opcionais

    eu Tensile Fixture

    eu Compression Fixture

    eu Blocos de Dureza

    de outras especificações

    Escala de Dureza A, B, C, D, E, F,

    G, H, K, N, T

    Maximum Test Force kfg:  5000(50KN) kfg:  150(1.5KN)
    Faixa de medição The testing machine is of Class I.

    1%~100%F·S

    20~88HRA,

    20~70HRC,

    20 ~ 100HRB

    70 ~ 94HR15N,

    42~86HR30N,

    20~77HR45N

    67~93HR15T,

    29 ~ 82HR30T,

    10 ~ 72HR45T

    Test Resolution 500000 yards(Full range without grading) 0,1HR
    Indication Error Relative error±1% It conforms to GB/T 230.2 EN-IS0 6508
    Displacement Indication Error Relative error±0.5% 0.001
    Displacement Resolution 0.000004mm 0.0001
    Lifting Speed of Screw Rod 0~55mm/min( Screw Stroke 100mm)
    Altura máxima da amostra 250mm
    Effective Specimen Width 250mm Distance from Rockwell

    Indenter to Center of Right Column :80mm

    Fonte de Tensão 220V / 50-60HZ
    Dimensões externas Length* Width * Height 880*600*1500mm
    Peso 720kg

     

    Confira nosso testador de dureza de venda quente!

    Faça um Orçamento Grátis

      fábrica de testador de dureza
      pt_PTPortuguês