HBE-3000
Электронный твердомер по Бринеллю
Основные особенности
- Force sensor loading, computer closed-loop control, reliable operation, high accuracy and a high degree of automation.
- Automatic loading-keeping-unloading, dynamic display of working process.
- After the test, the tester needs to remove the workpiece, measure it with the microscope attached to the instrument, and read the data.
- The operation is simple, economical and practical.
- The RS232 interface can be connected to peripherals.
Диапазон применения
- It is used to measure Brinell hardness of ferrous metals, nonferrous metals, nonferrous alloys, and powder metallurgy materials.
- It is widely used in metallurgy, forging, casting, bearing alloys.
Основные технические параметры
Модальный
Предметы |
Стандартная конфигурация | ||
л Большой плоский тест Bench 1
л Sторговый центр Плоский тест Bench 1 л Испытательный стенд V-типаh 1 л Блок твердости 2 л Шнур питания 1 л Φ2.5 Tungsten Carbide Ball Indenter 1 л Φ5 Tungsten Carbide Ball Indenter 1 л Φ10 Tungsten Carbide Ball Indenter 1 л 20X Electronic Micrometer Eyepiece
дополнительные аксессуары л Brinell Hardness Automatic Measuring Head л Special Software for Brinell Hardness л Laptop Computer л Блоки твердости других спецификаций |
|||
Диапазон измерения | 8~650 HBW | ||
Испытательная сила | kfg: 62.5,100,125,
187.5,250,500, 750,1000,1500,3000 N:613,980,1226, 1839,2452,4903, 7355,9807,14710,29420 |
||
Amplification of Microscope | 20 times | ||
Разрешение и точность измерения | Resolution:5μm
Accuracy is in line with GB/T231.2、 ISO 6506-2和ASTM E10 |
||
Indentation Measurement Range | 0.5~6mm | ||
Продолжительность испытательной силы | 5-99 секунд (с шагом 1 секунда) | ||
Максимальная высота образца | 240mm | ||
Расстояние от центра индентора до стенки станка | 130mm | ||
Выход | Последовательный интерфейс RS232 | ||
Напряжение питания | 220 В / 50-60 Гц | ||
Внешние размеры | 760×530×185mm | ||
Вес | Net weight :118kg, Gross weight :140kg |